BMC UADI PMC MIL-STD-1553 STANAG 3838 ARINC 429 ARINC 575 ARINC 562 ARINC 572 ARINC 582 ARINC 453 ARINC 708 RS 232 422

Features
MIL-STD-1553 Dual
Redundant Channels
ARINC 429 575 562 572 582..
ARINC 453 708
RS 232 422
M il-Std-1553 Configurations
1553-Test and Simulation Features
§ On-board Built-In-Test
§ Transformer & direct coupling
§ BC & RT error injection/detection
§ Support F-16, F-18, B-52, and A-10. 1553 Notice I & II
§ BC, RT,BM, BCBM, BCRT & RTBM
§ Commercial and Industrial Grade
1553-Bus Controller - BC
§ BC->RT, RT->BC, RT->RT
§ Mode Codes, Broadcast
§ Five different transmission modes: Single-shot, repeat, loop ,
cycle and multiple messaging mode
§ Programmable inter-message time delays
§ Response Gap measurement
§ Major/Minor frames
§ Software Programmable
§ Time-out response time
§ Enable/Disable Interrupt Conditions
§ Broadcast Enable/Disable (Notice I)
§ Status error Bit
§ Aperiodic messaging methods
§ Built-in Transmit/Receive Test
1553-Remote Terminal - RT
§ Up to 60 Store message buffers
§ Programmable response time Class A/B
§ Sub-Address programmable filter.
§ Long Loop Test Enable/Disable
§ 32-bit time-tagging
RS 232 & ARINC 429 575 562 572 582...
Test and Simulation Features
§ On-board Built-In-Test
§ Adv. interrupts and triggers
§ Support ARINC 2 & 6 wires protocol.
Transmit Mode
§ Software Programmable -:
§ Baud Rate – up to 1 Mbit
§ Parity Odd/Even/NO Parity
§ Loop Messaging Mode
§ Single-shot messaging mode
§ Programmable inter-message time delays
§ Independent transmit & receive channels
Receive Mode
§ Software Programmable Interrupt
§ Single message
§ Half buffer message

BMC's PMC-UADI provides new levels of performance and flexibility for multiple
avionics communications system. Available in commercial and ruggedized versions, includes an API (Application Programming Interface) software library that reduces application development time. Standard 1553 features 32-bit message time-tagging, triggers, extensive BC & RT link-list structures, error injection and detection, automatic/manual RT Status Bit, Mode Code responses, advanced BC functionality, on-board Built-in-Test Bus, transformer & direct coupling, hardwired RT address. With the highest speed encoder/decoder in the industry Available in a range of configurations to match your needs, the intelligent PMC UADI provide complete, integrated databus functionality for ARINC 429 and elated avionics protocols. The PMC UADI supports maximum data throughput on all channels while providing on-board message scheduling, label filtering, multiple buffering options, time-tagging,. Standard features 32-bit message timetagging with Bus Monitor mode, triggers and extensive structures. On-board Built-in-Test with the highest speed encoder/decoder in the industry.

Multi-function Interfaces
PMC-UADI multi-function interfaces are easily software configured to operate with simultaneous 1553 Bus Controller, Remote terminals and Bus Monitor functionality. The RS232 and ARINC section supports maximum data throughput on all channels simultaneously, operates with independent receivers (2) and transmitters (2).

Multi-function 1553
The PMC-UADI interfaces have all the features and functionality of the multifunction versions, but with only one operational mode enabled at a time. Each interface can emulate either a Bus Controller (BC), Remote Terminal (RT) or Bus Monitor (BM) and concurrent modes BCRT, BCBM and RTBM.

Multi-function ARINC and RS232
The PMC-UADI are easily software programmable to supports maximum data throughput on all channels simultaneously, operates with independent receivers and transmitters.

BAUD RATE
The PMC-UADI has all the features and functionality to operate with any ARINC or RS 232, 422 transmit/receive rate ranging from 100 Hz to 1 Mega bit.
Software
The PMC-UADI API is provided in source code in C, Linux & Windows drivers, along with libraries to interface with the different protocols.

Physical
• 4" x 3.8”

CPU
• Low Power 16 bit RISC processor

Environmental
• Operating temperature range: 0°C to +70°C
• Available Extended Temperature -40°C to +85°C

Humidity
• Up to 95%

Software Support
• Source code API library provided

1553 Connections
• Direct or transformer coupling
• Input and output triggers

1553 Operational Modes
• BC, BM, single RT, concurrent BCRT, BCBM & RTBM

Single Power (1553- 50% duty cycle)
• Stand-by Current less than 20 mA

Warranty: programs up to 3 years hardware
warranty

Product Description –ARINC & RS232

Transmission Mode
• “One shot” mode for simplified BC operation (Normal mode)
• “Loop” mode for simplified repeatable BC message operation
• Programmable transmit buffer size
• Modify messages, data or setup while card is running
• Selectable interrupt generation

Receive Mode
• 2 independent Receivers.
• Programmable message content
• Programmable receive buffer size
• Programmable labels selection

Bus Monitor
• Extensive filtering options
• 32-bit, resolution time tagging

Bus Controller
• Programmable control of:
         - Major and minor frame content and timing
         - Inter-message gap times (cycle mode)
         - Response time-out and late response
• Modify messages, data or setup while card is running
• Insert aperiodic messages into a running BC list
• “One shot” mode for simplified BC operation (Normal mode)
• “Loop” mode for simplified repeatable BC message operation
• Multiple sequencing messages based on real-time schedule
• Selectable interrupt generation
           - Full range of system conditions
           - External trigger
• Full error detection
           - Response Gap (Late response)
           - Number of words
           - Time-Out
           - No response
           - Data/Command Parity error
           - Manchester Code Error
           - Long Loop Test
• Extensive programmable error injection
• Multiple Store buffers with 32 bit timetag
Remote Terminal
• Programmable error injection
• Programmable message content (linked message buffers)
• Programmable Sub-Address selection
• Multiple Store buffers with 32 bit timetag
Bus Monitor
• Word status - Message status
• RT response time
• Interrupts can be selected by RT
• Extensive filtering and triggering options
        - By individual RT/subaddress
        - Transmit, receive or broadcast mode codes
        - Internal or external triggering
        - Trigger output on user specified data
• Up to 60 store buffers with 32 bit timetag

1. Temperature (Operating and Non-Operating)
                              Low Temperature - The equipment meets the requirements when tested in accordance with MIL-STD-810E,
                              Method 502.3, Procedures I and II. The storage temperature is -50?C for 5 hours and the operating
                              temperature is -40?C after temperature stabilization. High Temperature - The equipment meets the
                              requirements when tested in accordance with MIL-STD-810E, Method 501.3, Procedure I. The storage
                              temperature is +75?C for 5 hours and the operating temperature is +65?C after temperature stabilization.
2. Altitude
                              The equipment meets the requirements when tested in accordance with MIL-STD-810E, Method 500.3,
                              Procedures I and II, at 6,000 meters for operation and 13,000 meters for transportation. 15 minutes in each
                              altitude.
3. Vibration for Helicopter installation
                               The equipment meets the requirements when tested in accordance with MIL-STD-810E Method 514.4
                                paragraph I.4.2.2 (3) with the following values to be used for qualification:
                                Broadband random vibration:                              10 Hz to 300 Hz - 0.02 g²/Hz.
                                                                                                                   500 Hz - 0.002 g²/Hz.
                                Superimposed sinusoid:
                                                                                                                   14.2 Hz to 20 Hz - 2.0 g
                                                                                                                   28.4 Hz to 40 Hz - 2.5 g
                                                                                                                   17 Hz to 24 Hz - 2.4 g
                                                                                                                   50.4 Hz to 71 Hz - 6.0g
                                Vibration duration:                                                  15 minutes in each of the three axes in operational mode.
4. Shock - (Shock Crash Safety)
                                                    The equipment meets the requirements when tested in accordance with MIL-STD-810E, Method 516.4,
                                                    Procedure I. One shock in each direction, applied along three mutually perpendicular axes of the equipment.
                                                    No. of shocks:               6
                                                    Shock shape:                Sawtooth
                                                    Peak value:                    40g
                                                    Pulse duration:              11 msec
   • Humidity up to 95%
   • MIL-STD-810E
   • EMI MIL-STD-416