BMC UADI cPCI MIL-STD-1553 STANAG 3838 ARINC 429 RS 232 422

Features
M il-Std-1553 Configurations
1553-Test and Simulation Features

§ On-board Built-In-Test
§ Transformer & direct coupling
§ BC & RT error injection/detection
§ Support F-16, F-18, B-52, and A-10. 1553 Notice I & II
§ BC, RT,BM, BCBM, BCRT & RTBM
§ Commercial and Industrial Grade

1553-Bus Controller - BC
§ BC->RT, RT->BC, RT->RT
§ Mode Codes, Broadcast
§ Five different transmission modes: Single-shot, repeat, loop , cycle and multiple messaging mode
§ Programmable inter-message time delays
§ Response Gap measurement
§ Major/Minor frames
§ Software Programmable
§ Time-out response time
§ Enable/Disable Interrupt Conditions
§ Broadcast Enable/Disable (Notice I)
§ Status error Bit
§ Aperiodic messaging methods
§ Built-in Transmit/Receive Test

1553-Remote Terminal - RT
§ Up to 300 Store message buffers
§ Programmable response time Class A/B
§ Sub-Address programmable filter.
§ Long Loop Test Enable/Disable
§ 32-bit time-tagging

M ultiple Remote Terminal - MRT
§ Simulate up to 15 RTs simultaneously
§ Software Programmable Interrupt Conditions
§ Up to 150 messages buffer
§ Programmable response time Class A/B

Bus Monitor - BM
§ Error detection
§ Multiple monitoring methods
§ 32-bit time-tagging

BMC's Compact cPCI-UADI provides new levels of performance and flexibility for multiple avionics communications system. available in commercial and ruggedized versions, includes an API (Application Programming Interface) software library that reduces application development time. Standard 1553 features 32-bit message time-tagging, triggers, extensive BC & RT link-list structures, error injection and detection, automatic/manual RT Status Bit, Mode Code responses, advanced BC functionality, on-board Built-in-Test Bus, transformer & direct coupling, hardwired RT address. With the highest speed encoder/decoder in the industry Available in a range of configurations to match your needs, the intelligent PCI UADI provide complete, integrated databus functionality for ARINC 429 and related avionics protocols. The cPCI UADI supports maximum data throughput on all channels while providing on-board message scheduling, label filtering, multiple buffering options, time-tagging,. Standard features 32-bit message timetagging with Bus Monitor mode, triggers and extensive structures. On-board Built-in-Test with the highest speed encoder/decoder in the industry.

Multi-function Interfaces
cPCI-UADI multi-function interfaces are easily software configured to operate with simultaneous 1553 Bus Controller, Remote Terminals and Bus Monitor functionality. The RS232 and ARINC section supports maximum data throughput on all channels simultaneously, operates with independent
receivers (2) and transmitters (2).

Multi-function 1553
The cPCI-UADI interfaces have all the features and functionality of the multifunction versions, but with only one operational mode enabled at a time. Each interface can emulate either a Bus Controller (BC), Remote Terminal (RT) or Bus Monitor (BM) and concurrent modes BCRT, BCBM and RTBM.
Multi-function ARINC and RS 232
The PCI-UADI are easily software programmable to supports maximum data throughput on all channels simultaneously, operates with independent receivers and transmitters.
Software
The cPCI-UADI API is provided in source code in C, Linux & Windows drivers, along with libraries to interface with the different protocols.

Physical
• 3U cPCI card – 6.3” x 4” (160mm x 100 mm)

CPU
• Low Power 16 bit RISC processor

Environmental
• Operating temperature range: 0°C to +70°C
• Available Extended Temperature -40°C to +85°C

Humidity
• Up to 95%

Software Support
• Source code API library provided

1553 Connections
• Direct or transformer coupling

1553 Operational Modes
• BC, BM, single RT, concurrent BCRT, BCBM & RTBM
Power (1553- 50% duty cycle)
• Stand-by Current less than 20 Ma
• Arinc +12V & -12V – 20 Ma
• 5V – 1553 – 50% duty cycle <350mA

Warranty: programs up to 3 years hardware
warranty

Product Description –ARINC & RS 232

Transmission Mode
• “One shot” mode for simplified BC operation
(Normal mode)
• “Loop” mode for simplified repeatable BC message
operation
• Programmable transmit buffer size
• Modify messages, data or setup while card is
running
• Selectable interrupt generation

Receive Mode
• 2 independent Receivers.
• Programmable message content
• Programmable receive buffer size
• Programmable labels selection

Bus Monitor
• Extensive filtering options
• 32-bit, resolution time tagging

Bus Controller
• Programmable control of:
             - Major and minor frame content and timing
             - Inter-message gap times (cycle mode)
             - Response time-out and late response
• Modify messages, data or setup while card is running
• Insert aperiodic messages into a running BC list
• ”One shot” mode for simplified BC operation (Normal mode)
• ”Loop” mode for simplified repeatable BC message operation
• Multiple sequencing messages based on real-time schedule
• Selectable interrupt generation
            - Full range of system conditions
            - External trigger
• Full error detection
            - Response Gap (Late response)
            - Number of words
            - Time-Out
            - No response
            - Data/Command Parity error
            - Manchester Code Error
            - Long Loop Test
• Extensive programmable error injection
• Multiple Store buffers with 32 bit timetag

Remote Terminal
• Programmable error injection
• Programmable message content (linked message buffers)
• Programmable Sub-Address selection
• Multiple Store buffers with 32 bit timetag

Bus Monitor
• Word status - Message status
• RT response time
• Interrupts can be selected by RT
• Extensive filtering and triggering options
            - By individual RT/subaddress
            - Transmit, receive or broadcast mode codes
            - Internal or external triggering
            - Trigger output on user specified data
• Up to 60 store buffers with 32 bit timetag