BMC PC104 MIL-STD-1553 STANAG 3838 ARINC 453 ARINC 708 RS 232

Features
MIL-STD-1553 Dual
Redundant Channels

Test and Simulation Features
• On-board Built-In-Test
• Transformer & direct coupling
• BC & RT error injection/detection
• Adv. interrupts and triggers
• 4K of Dual Port Memory
• Support F-16, F-18, B-52, and A-10. 1553 Notice I & II
• Commercial and Industrial Grade

Bus Controller - BC
• BC->RT, RT->BC, RT->RT
• Mode Codes, Broadcast
• Five different transmission modes: Single-shot, repeat, loop , cycle and multiple messaging mode
• Programmable inter-message time delays
• Response Gap measurement
• Major/Minor frames
• Software Programmable
• Time-out response time
• Enable/Disable Interrupt Conditions
• Broadcast Enable/Disable (Notice I)
• Status error Bit
• Aperiodic messaging methods
• Built-in Transmit/Receive Test

Remote Terminal - RT
• Up to 100 RT message buffers
• Software Programmable Interrupt Conditions
• Single, Half or Full number of message Buffers
• Programmable response time Class A/B
• Sub-Address software programmable filter.
• Long Loop Test Enable/Disable

Bus Monitor - BM
• Error detection
• Multiple monitoring methods
• 32-bit time-tagging
• Up to 100 messages buffer

BMC's Compact PC104-CRAM-MRT-1553 provides new levels of performance and flexibility for MILSTD1553A/B Notice II for PC104 form factors. Available in commercial and rugged versions, the
PC104-CRAM-1553
includes an API (Application
Programming Interface) software that reduces application development time.

Standard features include 4 Kbyte of RAM, 32-bit message time-tagging, triggers, extensive BC & RT link-list structures, error injection/detection, automatic/manual RT Status Bit, Mode Code responses, advanced BC functionality, on-board Built-in-Test Bus, transformer & direct coupling, hardwired RT address. With the highest speed encoder/decoder in the industry, the PC104-CRAM-1553 Bus Monitor provides unparalleled error detection and monitoring of fully loaded buses.

Multi-function Interfaces
cPC104-CRAM-MRT-1553 multi-function interfaces are easily software configured to operate with simultaneous Bus Controller, Remote Terminals and Bus Monitor functionality.

Single-function Interfaces
Single-function PC104-CRAM- 1553 interfaces have all the features and functionality of the multi-function versions, but with only one operational mode enabled at a time. Each interface can emulate either a Bus Controller or Remote Terminals or Bus Monitor.

Software
The 1553 API is provided in source code, along with integrated support for Windows XP, 2000, Me, NT, 98, 95, Visual Basic and other operating systems.

Physical
• 3.4” x 4.0”

Environmental
• Operating temperature range: 0°C to +70°C
• Available Extended Temperature -40°C to +85°C

Humidity
• Up to 95%

Software Support
• API - Includes high-level API libraries for Windows XP, 2000, Me, NT, 98, 95, Visual Basic
• Source code API library provided

On-board Shared RAM
• 4 Kbyte (per dual-redundant channel)

Connections
• Direct or transformer coupling
• Input and output triggers

Operational Modes
• BC, BM, single RT, Concurrent Modes BC-RT, BC-BM, RT-BM

Single Power (50% duty cycle)
• +5 VDC: 0.3 A

Warranty: programs up to 3 years hardware warranty

RS232 Description - 2T2R
Transmission Mode
• “One shot” mode (Normal mode)
• “Loop” mode Programmable transmit buffer size
• Modify messages, data or setup while card is running
• Selectable interrupt generation
Receive Mode
• 2 independent Receivers.
• Programmable message content
• Programmable receive buffer size
• Programmable Interrupts condition
Bus Monitor
• Programmable receive buffer size
• Multiple message buffers
• 32-bit, resolution time tagging

1553- Bus Controller
• Programmable control of:
            - Major and minor frame content and timing
            - Inter-message gap times (cycle mode)
            - Response time-out and late response
• Modify messages, data or setup while card is running
• Insert aperiodic messages into a running BC list
• “One shot” mode for simplified BC operation (Normal mode)
• “Loop” mode for simplified repeatable BC message operation
• Multiple sequencing messages based on
   real-time schedule
• Selectable interrupt generation
                   - Full range of system conditions
                   - All detected errors
• Full error detection
                   - Response Gap (Late response)
                   - Number of words
                   - Word count error
                   - Time-Out
                   - No response
                   - Data/Command Parity error
                   - Manchester Code Error
• Extensive programmable error injection (on a per word basis)

1553- Remote Terminal
• Programmable error injection (on a per word basis)
• Modify data, status words or setup while card is running
• Programmable message content (linked message buffers)
• Up to 100 message buffers
• Programmable Interrupts conditions
• Programmable Sub-Address selection

1553- Bus Monitor
• Word status - Message status
• RT response time
• Interrupts can be selected by RT/SA/WC
• Extensive filtering and triggering options
                     - By individual RT/subaddress
                     - Transmit, receive or broadcast mode codes
                     - Internal or external triggering
                     - Trigger output on user specified data
• Real-time bus playback with RT edit mode
• 32-bit, 16 Mhz resolution time tagging
• Host software synchronization to external timing sources